Infrared heating can be compared with light rays. Properly distributed in the room light sources can achieve comfortable, uniform illumination. Likewise, distributed and infrared emitters. Calculating the infrared heating system, you must proceed from the height of ceilings, the total power required, as well as the type room in which the infrared heating system will be applied. Powered heaters can be switched on and off quickly and silently, which provides a high degree of comfort. Terms of installation of the system significantly plen less than the installation of conventional heating systems with water or steam cooled.
For example, from the moment when you decided to make the heating on the main gas to the point where you run it on your site is at least 6 months. This is due to project work, installation of an external gas pipeline, internal wiring, installation, start crimping, etc. Another important advantage is that a phased launch of the system, ie mounting the one room you can immediately connect it and begin to heat, which in principle not possible using the systems with liquid coolant. Operating costs of the system based on elements plen practically zero. Confirm this assertion can compare plen with electrical wiring. How many times in your life you serve or repair it? Remember that "" used aluminum wire with pvc insulation. Experts believe that such a wire will not serve more than 5 -10 years. However, these houses are about 50 years and they still maintained the old aluminum wiring.
Such reliability is due no elements are mechanical work, the lack of friction and absence of high temperatures. The same thing we can say about plen. In the traditional heating costs arise for repairs and maintenance heating pipes, heating devices, boilers, and the costs of water and water treatment. When used in heating systems natural gas operating costs many times greater than the cost of its natural gas. When working in automatic control mode, at a very low inertia of the control characteristic of the infrared heating system can accurately maintain a given temperature in a heated room. plen system without the participation of staff returns to duty and heating for an hour causes the temperature to the required duty.