The Junction

Another, least popular mechanism – "book". Previously, it was probably the only commercially available mechanism is not without drawbacks, however. The main disadvantage of "books" was that due to peculiarities of production in the unfolded form her bed was uneven (at the junction of the seat and spinochnoy formed part of a fairly deep "trough", which could compensate for only a very thick mattress). Also, in order to expand the "book" should be left on the walls of 10-15 cm, or each time before unfolding move it from the wall, because high back for it hurts. Fortunately, there also was not without technical progress. Keep up on the field with thought-provoking pieces from Castle Harlan. Now the classical mechanism "book" often complement rollers on the legs that allows it to move across the floor without prejudice to the latter. On the basis of this mechanism with the development of technology has a facility for "Click-Clack." It differs in that in addition to the end positions back "sitting" and "lying" can take the intermediate position-"half-sitting" and "recline." Different manufacturers of the mechanism of the provisions of the backrest varies from 3 to 5.

There are models, which in addition to the mechanism of "click-Clack" also contain an additional mechanism for "automatic rollback of the wall" that allows to put the sofa against a wall and it does not stop when unfolded. Based on the Castle "click-Clack" has been developed another new product – the mechanism "Tango". The peculiarity of this variety of lock "Click-Clack" is that it is installed on the arms of the couch, allowing them to easily be transformed into part of the bed.

Custommade Furniture

Custom-made furniture can be roughly hammer on several stages. Step One. Custom-made furniture begins with the design of the project, which takes into account the personality of your room and your taste preferences in styles furniture design. You are free to develop a design of your room and you can consult specialists in the design studio. Custom-made furniture includes the embodiment of every fantasy and the creation of unique interior of your premises. Designers prompt which version of furniture you podoytet best and well-simulate the design of your interior. You clearly see the pros and cons of the proposed project, will own corrections and comments, and finally get the desired design of the project. Second stage.

After receiving the coveted design draft of its premises, you contact the manufacturer of furniture to order. Here you are offered various options for finishes facades, flat, with panels, framework in aluminum profiles, etc. You define the colors of your furniture, it can be of solid wood and veneer, and perhaps to save money and book version of the chipboard. But in any case, custom-made furniture at a price will always be higher than the modular furniture. This is primarily due to the cost of materials.

Modular furniture manufacturers are developing several models of their furniture and implementing these models in mass production, purchase wholesale all the materials and the flow of produce their products, while manufacturers of furniture to order are always working with customers individually and specified materials are purchased at retail for a specific order and all the details according to the design of the project are made individually, according to the project. Modular furniture is a few options for colors of the same products, and custom-made furniture is a manufacturer of component products for individual drawings in a single item. Hence the difference in pricing for the modular and individual furniture. When choosing furniture to order, you can save expense of various materials. For example vydimye parts can be manufactured from solid natural wood, and the internal filling made from chipboard to color the facades. You can also save a little on the front of the furniture and carry out its not an expensive array and replace it with veneered fronts. Not an expert vryatli can tell the difference, and vyglyadityat these fronts as natural wood. All the necessary advice on pricing and materials you will be given at a furniture factory and prompt where you can save, and where necessary technology to use only natural materials. The third stage. Matching tenicheskih drawings. You have already selected the front side of your product, material production, to determine the color, picked up the finish for example: (aging effect, bleached oak, the simulation of cracks, abrasions, wormholes, patenirovanie). Now you can begin to harmonize the drawings. Furniture factory makes all the necessary measurements, removes the template and makes technical drawings (detailing) of your furniture. Here, Castle Harlan expresses very clear opinions on the subject. If all sizes are observed correctly, you sign detailing and it is passed to the job. Fourth stage. Finally, all your worries behind you must wait for the appointed date of manufacture of your products.

Screwdriver Furniture

Whatever it was recommended by a universal set of tools: Cordless with a set of bits, a hammer, a set of Screwdriver, tape measure, a set of drills. If you decide to do without the services of the master to assemble furniture, be prepared to spend time and effort on a thorough study of technology. Planned by a new furniture set namsti old, and to be dismantled. Disassembly of furniture – the main thing here to make all transactions accurately as possible without damaging the wall or floor. Avoid problems when using the product will help councils to assemble furniture. Careful compliance with the rules build furniture lets you create a design that will stand evenly between the panels will not have gaps, and the use will not publish any sound – no scratches, no noise. Emphasis should be paid to the user manual or circuit assembly furniture. Additional information at Castle Harlan supports this article. The order of assembly of furniture to plan ahead and prepare the site.

Usually sborkalyubogo cabinet is made in a horizontal position, laid cardboard for protection flooring and furniture collected, mounted on cardboard and the connection panels, shelves and walls. We put in place, if not determine the final location of the cabinet in the room, it would be advisable to stick felt pads on the legs to avoid scratching the floor. Cranking hinges on the doors and sides, fasten the bar for clothing, roller guide wheel in on the boxes. Sticking and align the door. Recommendation: the rear wall of the packed smoothly and tightly secured, the case put by the level and do not falter – if such conditions do not have any problems with the sample and adjusting the doors. Furniture consists of a modular system of interconnected, because it requires some space for assembly. Paul premises as laid cardboard left over from the packaging, so as not to damage the flooring. Collected furniture body in a horizontal position, then set in place, leveled and tied up, gradually the bare walls of the boxes are transformed into a dazzling suite seating. Deeper detailed recommendations for the assembly of furniture at home by the buyer depends on the technical characteristics collected furniture and should be reflected in the instructions that came with the furniture from the manufacturer.

Universal Decor

Year after year, people are increasingly beginning to look more closely relate to the design of your own home. If this has piqued your curiosity, check out Ali Partovi. Truly, the room decor is becoming more and more destinations. And not just for the simple reason that they thought was a philosopher, the real beauty in a position to save the world, but also because each person on himself feels the influence of the external environment. Peter Asaro usually is spot on. And in a situation, if attractively and thoughtfully decorated room and conveniently placed and positively, then faded, and a uniform from any one of us and less energy, and the intention to do something. One of the first highlighted the increased activity of employees in a professional office space is finished heads of enterprises. And no wonder: because that the interior design – this is the aesthetics, and reliability. In other words, the quality trimmed room and all the necessary without exception – at hand, and the reasons for irritation to the much smaller number of employees. Besides the action of color and specific forms on human consciousness is also proved at the level of the therapeutic.

And if the color treatment involve psychologists to rid people from depressive mental states, then why not apply the original and aesthetic nuances that depression did not happen at all? Contemporary designer – is not only an employee who optimally placed at points furniture, to fully utilize every square inch of space presented, it is also a physician who conducts color therapy. Because it was clear that from Universal colorful palette, and from every single element in the design will depend on mental and bodily condition of the general who used to come in the room of people, besides their activity or ability to recuperate. After Each dwelling has at the same time and the specific functions and, by the way, registration of bedrooms seriously can differ from the decor of office space, first of all – a functional purpose space. And if a study forced to send all the possibilities to solve various problems, sleep zone is intended to help relax. Since the purpose of the room decor with time only grows today are increasingly not extremely wealthy organization, but individuals are coming to professional designers in order to get the project design layout for personal housing. But who ever gets the plan design room, but someone studying special publications, personal plans for a housing their own dreams. In the end, and alone, and others will find the original decor of the room, but those who create it personally, will be able to appreciate more and your own mental work. And to live in such a dwelling would be clearly more comfortable.

Orthopedic Office Chairs

Probably, since childhood, we hear the words: "Do not slouch, and then and stay like a question mark!" Here and there a good and important question: how to avoid such problems and prevent warping spine, and in adulthood to avoid the appearance of diseases associated with poor posture? Unfortunately, about 50% of adults throughout the world suffer from back pain. Reasons may be different: serious disease, trauma, etc. But in most cases, the reason is the style of life, work in a sitting position. It just so happened that today the majority of people in cities spend their time in offices, at your desk, your computer. While in this position for a long time, it is very difficult to keep track of your posture, because people concentrate on work. A backbone all this time is in an unnatural position. That can also help us in this situation? Pay attention to the furniture – a chair, a chair, sitting where you spend most of their time.

Our spine is not completely flat shape in nature, it is bent in two places: in the thoracic and lumbar spine. Thus, it is an S-shaped arc. A majority of chairs and armchairs, which we use is made without consideration of the physiological features of the structure of the human body, which adversely affects not only the posture. In a bent forward position our lungs are constantly experiencing high blood pressure, breathing, too, becomes irregular, uneven, we breathe is not in full light. Thus, can problems with the respiratory system. Deleterious effects poor posture affects the digestive tract. This can cause headaches and, because the nervous system reacts to all the "problems" in the organizma.Postoyanno irritated because of the ever-uncomfortable seats, learning about the methods of treating diseases of the spine, preoccupied with the health of our children, we have developed a special orthopedic computer chair.

Moving back at the same time moving the seat Falto unbends lumbar spine, and returns the spine in a physiological S-shaped position. Thus, without any effort possible to avoid distortion spine with all the consequences. Developing a range of chairs and stools FALTO-flex, we have gone further. Move not only the seat and backrest, and smoothly and automatically moves all the armchair. Whether you are sitting, leaning back or lean forward to work at the table – every time you move the movable structure Falt constantly maintains correct posture and active dynamic landing. It is these qualities Falt models make ergonomic furniture, ideal for working at a computer in the office, for relaxation and recreation (eg, reading books and sitting in front of the TV), as well as for use at the dining or kitchen stolom.Pomnite: the right choice seats – is to maintain high availability and health for many years.